The ShoreMaster ShorePort® Single Unit gives one personal watercraft a dedicated drive-on storage platform without a winch, cable or electrical connection. Approach at a controlled speed, guide the hull onto the adjustable roller system and step onto the textured walk surface once the PWC is secure. Rotationally molded polyethylene keeps ownership simple by resisting corrosion, rot and routine waterfront wear.
Built for Easier Everyday PWC Use
Drive-On Convenience
Launch and store the PWC without hand cranking, electrical power or repeatedly tying the hull directly against the dock.
Adjustable Roller Support
Three polyurethane rollers can be repositioned to improve the loading angle and support for many Sea-Doo, WaveRunner, Jet Ski and similar PWC hulls.
Safer Boarding Surface
The wide, textured platform provides a more stable area for stepping on or off the watercraft in wet conditions.
Flexible, Expandable Layout
Install one ShorePort now, attach it to many dock styles or expand into a multi-port setup as your waterfront needs change.
ShorePort Technical Specifications
Choose the Connection and Anchorage for Your Dock
The ShorePort itself is only one part of the installation. Use the add-on selector above to choose a connection and anchoring package based on the dock type, desired orientation and water conditions.
Free-Standing Anchorage
No Dock-Side Connection
- Useful when the ShorePort will be positioned independently from the dock.
- Requires a properly planned pipe or anchoring system for the water depth and bottom conditions.
- Confirm safe boarding access and adequate clearance around the port.
Floating Dock Connection
Front or Side Mount
- Front/perpendicular mounting creates a straight approach from open water.
- Parallel/side mounting places the ShorePort alongside the dock for easier access to the PWC.
- Calm-water flexi-hinge and rough-water pipe/stand-off systems use different hardware.
PolyDock Connection
Integrate with a PolyDock Layout
- Select perpendicular or parallel hardware based on how the ShorePort will sit relative to the dock.
- Match connector color and hardware to the selected Gray or Tan port where required.
- Confirm the planned layout before ordering the add-on package.
What’s Included
- One ShoreMaster ShorePort drive-on PWC port in the selected Gray or Tan color
- Three adjustable roller supports
- Textured walk surface and integrated 8-inch tie-down cleat
Not Included in the Base Product
- Connection or anchoring hardware unless selected as an add-on above
- Supplemental flotation for capacities above 1,150 lb
- Pipe, lumber, dock modifications or installation labor
- Personal watercraft or mooring line
Confirm PWC Weight, Dock Type and Water Conditions
Use the fully fueled and loaded PWC weight—including gear—when checking capacity. Supplemental flotation can increase capacity to 1,450 lb, but the complete installation must still be appropriate for the watercraft and shoreline.
Choose connection hardware for the actual dock structure, water depth and wave exposure. Do not run on the ShorePort when wet, and periodically check that bolts and connectors remain secure.
Need Storage for Two PWCs?
The single unit is ideal for one PWC and can be expanded later as your needs change.
The double-unit listing packages two matching ShorePorts and provides connection/anchorage options planned for a two-port layout.
Frequently Asked Questions
Will ShorePort fit my PWC?
The adjustable roller positions accommodate many Sea-Doo, Yamaha WaveRunner, Kawasaki Jet Ski and similar hulls. Confirm the watercraft dimensions, loaded weight and hull shape before ordering.
What is the standard weight capacity?
One ShorePort supports up to 1,150 lb in its standard configuration. Approved supplemental flotation can increase capacity to 1,450 lb.
Can ShorePort connect to my existing dock?
In many cases, yes. It can be connected to floating, standing, wheel-in or PolyDock systems, or installed as a stand-alone port. The correct hardware depends on dock construction, orientation, water depth and wave conditions.
Does the base price include anchoring hardware?
Not necessarily. Choose the appropriate connector and anchorage add-on above, or select None only when reusing a confirmed compatible system or working from a dealer-specified installation plan.
What routine maintenance does ShorePort require?
Rinse away debris as needed, inspect the roller assemblies and periodically confirm that connection hardware and fasteners remain secure. Follow the official manual for adjustment and service procedures.
Need Help Building the Correct ShorePort Package?
Call with your PWC make/model, fully loaded weight, dock type, water depth and a few shoreline photos. We can help narrow down the port color, orientation and connection package.
Call 888-298-9702
