The ShoreMaster Quick Steps Bracket connects one Pivoting QuickSteps stairway to a dock. Unlike a standard InfinityTrack accessory bracket, this dedicated connector replaces one left and one right handrail-upright pocket at the upper end of the stairs, preserves the handrail connection and creates a two-point attachment to the dock rail. Select the bracket by dock series before ordering.
A Purpose-Built QuickSteps Connection
Matches the Dock Frame
Separate connector kits are shaped for Infinity RS4, RS7 and TS9/FTS9 rails, plus a universal bolt-on option for other suitable docks.
Keeps the Handrails Functional
The connector includes upright pockets so the QuickSteps handrails continue through the dock-side end of the stairway.
Secure Two-Point Attachment
The ShoreMaster versions use two T-handles to secure the connector to the dock rail at the top of the stairs.
One Connector per Stairway
A complete QuickSteps run requires one dock-connection kit at the upper landing, regardless of how many stair sections are spliced below it.
Select the Exact Bracket Version
Use the dock model, not the width of the stairs, to choose the connector. The four options are not interchangeable.
Infinity RS4
Part 1026546
- Designed for the RS4 InfinityTrack rail profile.
- Includes the QuickSteps dock-connector weldment and mounting components.
- Secures to the dock with two T-handles.
Infinity RS7
Part 1026548
- Designed for the RS7 InfinityTrack rail profile.
- Do not substitute an RS4 or TS9 bracket.
- Connects at the dock-side end of the QuickSteps assembly.
Infinity TS9 / FTS9
Part 1026550
- Designed for TS9 and FTS9 InfinityTrack dock frames.
- Uses the dock rail to create a tool-free removable connection.
- Confirm the dock section has proper leg or flotation support.
Universal Bolt-On
Part 1026601
- For many structurally suitable non-ShoreMaster docks.
- Dock-specific attachment hardware is not included because installations vary.
- Fastener type, backing and reinforcement must be determined by the installer.
What Is Included
Included with the Selected Connector Kit
- One QuickSteps dock-connector assembly matched to the selected option
- Handrail-upright pockets integrated into the connector
- Connector hardware supplied for the ShoreMaster versions
- Two T-handles for RS4, RS7 and TS9/FTS9 connection
Not Included
- Pivoting QuickSteps stair assembly
- Splice kits for joining multiple stair sections
- Universal dock attachment fasteners, backing plates or reinforcement
- Site preparation or installation labor
This Is Not a Standard InfinityTrack Accessory Bracket
QuickSteps use a dedicated stair connector that integrates with the handrail uprights. Do not order standard InfinityTrack Accessory Dock Brackets as a substitute for the Quick Steps Bracket.
For the universal version, the official instructions state that attachment hardware must be determined by the installer because dock construction varies.
Complete the QuickSteps System
Start with the 4- or 6-step Pivoting QuickSteps assembly, then add this dock bracket when the stairway will connect to a dock.
Add one Quick Steps Connection Kit for each joint when the route requires multiple stair sections.
Frequently Asked Questions
How many Quick Steps Brackets do I need?
One connector kit attaches one complete QuickSteps stairway to the dock. The connector creates both the left and right attachment points at the upper end of the stairs.
How do I choose RS4, RS7 or TS9/FTS9?
Identify the ShoreMaster dock frame model and select the matching connector part number. The rail profiles differ, so the brackets should not be interchanged.
Is this the same as an InfinityTrack Accessory Dock Bracket?
No. This bracket is made specifically for Pivoting QuickSteps and incorporates the stair handrail-upright pockets. Standard accessory brackets are used for products such as ladders, bumpers and furniture.
Does the universal bracket include bolts for my dock?
No. The universal connector can be adapted to many docks, but the installer must select the fasteners and any backing or reinforcement required for the actual structure.
Are the QuickSteps included?
No. This listing is for the dock-connection kit only. The 4- and 6-step stair assemblies are sold separately.
Need Help Identifying Your Dock Series?
Call with a photo of the dock side rail and any RS4, RS7, TS9 or FTS9 markings. We can help identify which Quick Steps Bracket option to review.
Call 888-298-9702
